Home | Abrasive Vacuum Recovery System| KL-VR-90WD Vacuum Recovery System For Wet & Dried Abrasive, Mud

Home > Abrasive Vacuum Recovery System

KL-VR-90WD Vacuum Recovery System For Wet & Dried Abrasive, Mud

Place Of Origin: China
Working Type: Vacuum Suction
Usage: blast cleaning
Application: Blasting Painting
Product description：KL-VR-90MD Portable Vacuum Recovery System from Kholee Blast is used to not only recovery wet & dty steel shots, grits, garnet, copper slag after blasting, but also used to suck mud from tanks,
INQUIRY

KL-VR-90WD Vacuum Recovery system not only is used to recovery dry abrasives after blasting for ship, tanks, but also used to suck wet abrasives, water, oil, dust and mud. The equipment structure, working principle and power consumption is as following:

The whole system is made of vacuum pump, motor, dust collector, water separating unit, electrical control and abrasive storage silo etc.

The vacuum pump driven by motor will produce high negative pressure to suck blasting abrasives, water, oil, mud. Then these materials will enter abrasive storage silo via hose. Then dust separating, water & vapor separating then abrasive recycle finished. During abrasive suction, water suction or mud suction, in order to reduce dust and water into vacuum pump, the system is equipped with cyclone dust collector, water separator, pulse jet dust collector.

Application

To recovery Steel Shots, grits and garnet after blasting and widely used in the industry of shipbuilding, ship repair, big tank internal blasting etc.

Electrical Motor		90kw, IP55, Class F
Motor Rotation Speed		1480rpm
Air Flow		60 m³/min
Shots/Grits Recycle Capacity		6~10 tons/h From silo to work site 30m From machine to silo 20m
Wet abrasives, Water & Mud Suction Capacity		10~15t/h, stored in abrasive storage silo.
Max vacuum pressure		-0.067Mpa/-450mmHg
Dust Filtering Method		Cyclone Dust Collector + Water Vapor Separator + Pulse Jet Dust Collector
Dust removing system	Cyclone dust collector	1set
	Filter material	High efficiency polyester fiber
	Filter Size	Ф325×1000mm × 4pcs, 64m²/pc
	Dust emission density	≤15mg/m³
Pulse jet control		It is controlled by PLC and do pulse jet by manual - auto pulse jet cleaning
Noise		≤90dB(A) @ 5m radius scale
Filtering cleaning system		it adopts outer compressed air and do pulse jet cleaning. The compressed air 0.5~0.7Mpa, 0.5m³/min
Size of abrasive storage tank		About Φ1700×3150mm, Capacity 10tons
Outsize of equipment		≤ 2900×2200×2450mm
Electrical Control System IP54		3Ph; 415V/50Hz Key parts from Schneider, CHINT/ Delixi PLC by Mitsubishi/Siemens Level Indicator to inspect the volume of dust in cyclone dust collector