Home | Abrasive Vacuum Recovery System| KL-VR Abrasive Vacuum Recovery Machine for Blast Room

Home > Abrasive Vacuum Recovery System

KL-VR Abrasive Vacuum Recovery Machine for Blast Room

Place Of Origin: China
Working Type: Vacuum Suction
Usage: Recovery Blasting Abrasives
Application: Blasting Cleaning
Product description：Abrasive Vacuum Recovery Machine from Kholee Blast can be equipped in big blast room to recovery spent recyclable abrasives like steel shots, grits, garnet after blasting. It is widely used in Shipyar
INQUIRY

The conventional method of recovering spent abrasives is both labor intensive and time consuming, while the fastest and most cost-effective method of cleaning up spent abrasives is by vacuuming recovery.

Working Principle

Abrasive Vacuum Recovery system is designed to recover spent recyclable abrasives from a blasting area into a silo for subsequent return to the blast cleaning equipment or, in the case of expendable abrasives, for disposal into a waste hopper. After depositing the abrasive into the silo, the vacuum flow containing air and dust continues on to the suction unit, where the dust particles in this stream are removed by high performance filter cartridges prior to exhausting air to atmosphere.

Standard Safety Features

- System automatically shuts-off to prevent damage to the vacuum producer when the suction hose is choked up with abrasives and when the electric motor’s current rises above a certain pre-determined value.

- Cyclone is equipped with full-tank sensor to shut down the vacuum machine when it is full and prevent overloading of abrasives in the dust collector. Silo full-tank sensor available as an option.

- An emergency ‘STOP’ button, when depressed, will automatically cut off all electrical supply.

Application

To recovery Steel Shots, grits and garnet after blasting and widely used in the industry of shipbuilding, ship repair, big tank internal blasting etc.

Model	KL-VR-90 Abrasive Vacuum Recovery System	KL-VR-132 Abrasive Vacuum Recovery Machine
Electrical Motor	90kw Star Delta	132kw Star Delta
Air Flow	60m3/min @-450mmHg	78m3/min @-450mmHg
Max Vacuum Degree	-0.0667Mpa Over vacuum protection by vacuum relief valve	-0.0667Mpa Over vacuum protection by vacuum relief valve
Vacuum Pump	KFM Korea \| ANLET Japan	KFM Korea \| ANLET Japan
Dust Collector	PLC control Pulse Jet Dust Collector Periodical Air Reverse Jet	PLC control Pulse Jet Dust Collector Periodical Air Reverse Jet
Compressed air	0.6~0.8Mpa, 1.0m3/min	0.6~0.8Mpa, 1.0m3/min
Dust Emission Density	≤15mg/m3	≤15mg/m3
Electrical Control	PLC Auto Control, IP54 Protection 380V/415V/440V, 50Hz/60Hz, 3Ph	PLC Auto Control, IP54 Protection 380V/415V/440V, 50Hz/60Hz, 3Ph
Noise Level	≤85dB(A) @ Radius 5m	≤85dB(A) @ Radius 5m
Equipment Size	2.9×2.2×2.45mtr	3.2×2.3×2.6mtr
Shots silo Capacity	10 tons. Φ1700×3150mm	10 tons. Φ1700×3150mm
Abrasive Recovery Capacity	6~10 t/hr 40m vertical suction, 15m horizontal Machine to silo	8~15 t/hr 60m vertical suction, 15m horizontal Machine to silo
Supply Scope of Equipment	- Vacuum Recovery Machine, 1 unit - Abrasive Collection Tank,1 unit - Vacuum Hose 6” - Shots Suction Hose 4”/ 5” - Dust Suction Hose, 2”	- Vacuum Recovery Machine, 1 unit - Abrasive Collection Tank,1 unit - Vacuum Hose 7” - Shots Suction Hose 4”, 5”,6” - Dust Suction Hose, 2”